The Short Answer
For most screened pools, compare fine-filter options before paying for maximum leaf capacity. Screens can reduce large leaves, but fine pollen, dust, small insects, and swimmer debris can still settle. Check the exact included media; a fine-filter-ready model may not include every filter option.
Make sure Fit Before Filtration
Measure the longest pool dimension and make sure floor, wall, and waterline coverage needs. An enclosure does not change cable reach or make stairs easier to navigate. Very shallow shelves and tight steps may still need brushing toward the main floor.
Use the Debris to Select Media
- If dust returns to the water, verify that fine media is installed correctly and is not damaged or overloaded.
- If storms still bring leaves through doors or torn panels, compare larger-debris media as well.
- Rinse the robot filter based on observed loading; a timer cannot compensate for a full basket.
- Keep the enclosure and circulation system maintained so the robot is not expected to solve an upstream debris problem.
Set a Measured Routine
Observe how quickly material returns after cleaning, then adjust frequency rather than assuming a universal schedule. Use the timer guide for control options, the inground guide for pool fit, and the 15,000-gallon guide only if that volume actually matches—length and cable reach remain the sizing checks.
