The Short Answer
At a measured 40 feet, shortlist models whose specifications cover at least that pool length, then verify the deeper three-dimensional route. Compare the current Quantum for basket access and connected controls, the Premier for adaptable debris media, and the Sigma for gyroscope navigation plus a triple-motor configuration. These distinctions help choose among eligible models; they do not replace the manual's reach limits.
Measure More Than the Waterline
Record the straight length, then measure or estimate the route from the allowed supply side to the farthest deep-end floor area. Add any offset or freeform section. The required electrical and power-supply setback is exact, so follow the current manual rather than placing equipment at the water's edge or assuming midpoint placement is always allowed.
Rule Out Shorter Options
The broader matching grid may include a shorter-range model for comparison, but it should be excluded when its published limit is below the actual 40-foot measurement. For eligible models, choose waterline coverage only if wanted and match the filter to seasonal debris or fine material.
Check the First Full Cycles
- Make sure the cleaner reaches both end walls and the deepest floor area without a taut cable.
- Inspect the filter before and after a heavy cycle to learn whether debris capacity is sufficient.
- Brush benches, stairs, and shallow shelves that remain repeat blind spots.
- Store the cable loosely and inspect it for twists or damage as the manual recommends.
Compare the 30,000-gallon guide only as a volume cross-check. Use the 50-foot guide for a longer measurement, the lap-pool guide for narrow geometry, or commercial cleaners when residential specifications are exceeded.














