Fall Sale! Save $25 off $500 or $50 off $1000 — biggest sale of the year. Applies automatically at checkout, no code needed. · Shop the SaleFall Sale! $25 off $500 · $50 off $1000
Upgrades suction power and canister volume over the Aquasweep S1 for heavier sand and leaves.
7.2-Lb Pole-Ready Head
Snaps onto standard telescopic pool poles or works handheld on shallow steps.
Top-Access Debris Chamber
Empties trapped sand, acorns, and leaves in seconds.
Steps, Sun Shelves & Spas
Targets narrow stair risers and spa footwells on demand.
Zero Vacuum Hoses
No air-locks or skimmer plates—just dip in and vacuum.
1-Year Maytronics Niya
Built by Maytronics' Niya cordless division.
The Bottom Line
Where the Niya Aquasweep S10 Fits
Best For
High-power manual spot-vacuuming on sandy steps, tanning ledges, and spas without hooking up skimmer hoses.
What We’d Buy
A higher-capacity handheld vacuum for steps, ledges, and spas. Choose an autonomous cleaner if you want whole-floor coverage.
Spot Cleaning or Full Automation?
The Niya Aquasweep S10 is a higher-output manual cordless vacuum for stairs, tanning ledges, and spas. For automatic whole-floor cleaning, compare the Dolphin E10 or Aquabot X2.
The Niya Aquasweep S10 is a cordless handheld pool vacuum from Niya, Maytronics' entry-level brand. It is pushed by hand on a pole to spot-clean the floor, walls, steps & corners of in-ground and above-ground pools, spas and hot tubs, rather than running a cycle on its own like a robot.
Maytronics lists a weight of 7.2 lb and a 1-year warranty.
Specifications as published by Maytronics for product no. 9997301-US (UPC 810071222917).
FAQ, Manuals & Parts
Niya Aquasweep S10 FAQ & Owner Support
Frequently asked questions
Straight answers on parts, ownership, and the closest models you can order today.
Aquasweep S10 vs. Aquasweep S1—what's the difference?
The S10 ($249 list) steps up suction power, battery capacity, and top-access canister size over the lighter entry Aquasweep S1 ($169 list)—both are manual pole-mounted spot vacuums.
Troubleshooting the Niya Aquasweep S10
Maytronics' own fixes for the problems owners report most, followed by the symptom table from the user manual.
Symptom
Possible reason
What to do
Doesn't work
Whether the ON/OFF knob is fully toggled in place or not
Try to toggle the ON/OFF knob
See if something is stuck in the impeller. Use a flashlight if needed
Contact Maytronics customer care
The battery pack is damaged
Contact Maytronics customer care
Poor suction
Ensure the machine is fully submerged underwater
Completely submerge the device
Check that the brush suction is not blocked by a large object
Remove the large foreign object from the suction
Smells Bad
The filter has not been properly cleaned after use
Clean and rinse the debris from the filter after each use
Plastic odor
Leave the new machine in an empty area for 20 minutes until the plastic odor dissipates.
Indicator light is off
Check that the pool cleaner is turned on
Flip the switch knob to check whether the indicator light is on on when the machine starts up
From the Niya Aquasweep S10 user manual's troubleshooting table.
